TECHNOLOGICAL AND CONSTRUCTIVE CONSIDERATIONS ENVISAGED IN THE CONSTRUCTION OF A 3D-PRINT RIM FOR ROBOTIC SYSTEM

Cosmin Eugen Necsa

Cosmin Eugen Necsa Politehnica University Timisoara

Keywords: rim, CAD, CAM, 3D printing, PETG, compression

Abstract

In the paper it is made a study in which are analyse the generation, 3d printing and testing at compression of a rim for robotic system. For the CAD solution, there are generated two type of rim to study the mode of generation, but also the difference from the geometric pointe of this generated elements. Taken into consideration the time of printing, but also the modification of the medium temperature in the printing chamber for day to night the author of the study made a modification for printing machine. For testing the printed rim it is made an compression press with which it is possible to study bout the deformation of the rim but allow the modification of the dimension of the rime in different situation in compression situation.

References

1. Robot Guidance: Automated Wheel Installation, https://www.automate.org/case-studies/robot-guidance-automated-wheel-installation (2021)
2. https://www.solidworks.com/ (2021)
3. https://www.3djake.com/artillery?gclid=EAIaIQobChMI88mO4aSj8QIVReJ3Ch2WawUQEAAYAiAAEgJHtPD_BwE (2021)
4. Volcano Nozzles - https://e3d-online.com/products/volcano-nozzles, (2021)
5. Ultimaker Cura - https://ultimaker.com/software/ultimaker-cura, (2021)
6. Vasilescu, M.D., CONSTRUCTIVE AND FUNCTIONAL CONSIDERATIONS FOR USING THERMALLY INSULATED ENCLOSURE IN 3D RESIN PRINTING PROCESS, Nonconventional Technologies Review, Romania, September 2020, 57-61 pag, (2021)
7. Vasilescu, M. INFLUENCE OF TECHNOLOGICAL PARAMETERS ON THE DIMENSION OF FLAT AND ROUND PARTS GENERATED WITH ABS BY FDM 3D PRINTING. Nonconventional Technologies Review, Romania, December 2017, 27-32 pag, (2021)
8. Vasilescu, M.D., INFLUENCE OF TECHNOLOGICAL PARAMETERS ON THE DIMENSION OF FLAT AND ROUND PARTS GENERATED WITH ABS BY FDM 3D PRINTING, Nonconventional Technologies Review, Romania, December 2017, 27-32 pag, (2021)
9. Vasilescu, M.D., Fleser, T. INFLUENCE OF TECHNOLOGICAL PARAMETERS ON THE DIMENSION OF GEAR PARTS GENERATED WITH PLA MATHERIAL BY FDM 3D PRINTING, Revista de materiale plastice, ISSN 0025 / 5289, 2/2018, 55, 247 – 251 pag, (2021)