STUDY ON INCREASING THE CORROSION RESISTANCE OF ALUMINUM ALLOYS BY FSP/SFSP PROCESSING
Abstract
The work considers an analysis of some studies and researches carried out internationally regarding the improvement of the corrosion resistance of aluminium alloys through FSP/SFSP processing. The study investigates the increase in corrosion resistance of aluminium processed by friction stir processing in various working environments. The paper aims to identify the parameters of the technological process that influence the increase in corrosion resistance and the improvement of the metallic properties of aluminium alloys. The obtained findings will contribute to the expansion of the use of aluminium alloy processing technology in various industrial applications exposed to corrosive environments.
References
2. Dhamodaran, S., Senthil Kumar, V.S., Kuppusamy, R. Testing and Analysis of Mechanical, and Corrosion Properties of 2024 Aluminum Alloy Using Friction Stir Processing. ASME International Mechanical Engineering Congress and Exposition (IMECE), Volume 4: Advanced Materials: Design, Processing, Characterization and Applications; Advances in Aerospace Technology, New Orleans, Louisiana, USA, https://doi.org/10.1115/IMECE2023-111487, (2023).
3. Zainelabdeen, I.H., Al-Badour, F.A., Adesina, A.Y., Suleiman, R., Ghaith, F.A. Friction stir surface processing of 6061 aluminum alloy for superior corrosion resistance and enhanced microhardness. International Journal of Lightweight Materials and Manufacture, Vol. 6, Issue 1, pp 129-139. https://doi.org/10.1016/j.ijlmm.2022.06.004, (2023).
4. Pushpa, V. Friction stir processing, Linkedin, https://www.linkedin.com/pulse/friction-stir-processing-varun-pushpa-tmhbe, (2024).
5. Asrari, Gh, Daneshifar, M.H., Hosseini, S.A., Alishahi, M. Selective alloying of pure aluminum with varying amounts of magnesium using friction stir processing for improved mechanical and corrosion-resistant properties. Materials Chemistry and Physics, Vol. 306, 128091, https://doi.org/10.1016/j.matchemphys.2023.128091, (2023).
6. Vignesh, R.V., Padmanaban, R. Intergranular corrosion susceptibility of friction stir processed aluminium alloy 5083. Materials Today: Proceedings, Vol. 5 No. 8, pp. 16443-16452. https://doi.org/10.1016/j.matpr.2018.05.143, (2018).
7. Satyanarayana, M.V.N.V., Manohar, G., Jain, V.K.S. Kumar, K.K., Kumar, A., Sundar, S. Influence of Cooling Media on the Electrochemical Behavior of Friction Stir Processed Al2014 Alloy. Springer Link, JOM, Vol. 75, pp. 526-536, https://doi.org/10.1007/s11837-022-05611-7, (2023).
8. Keerthana, B.V.S., Satyanarayana, M.V.N.V., Shankar, M.N.S. Effect of Cooling-Assisted Friction Stir Processing on Corrosion Behavior of AA5083 Alloy. Journal of The Institution of Engineers, India Series D, 105, pp. 191-200, https://doi.org/10.1007/s40033-023-00470-1, (2024).
9. Kumar, A., Kumar, V. Analysis of Heat Input and its Effects on Microstructure Development and Mechanical Properties of Friction Stir-Processed AA7075 Alloy. Springer Link, JOM Vol. 76, pp. 473-485, https://doi.org/10.1007/s11837-023-06250-2, (2024).
10. Pang, J.J., Liu, F.C., Liu, J., Tan, M.J., Blackwood, D.J. Friction stir processing of aluminium alloy AA7075: Microstructure, surface chemistry and corrosion resistance. Corrosion Science, Vol. 106, pp. 217-228. https://doi.org/10.1016/j.corsci.2016.02.006, (2016).
11. Keerthana, B.V.S., Satyanarayana, M.V.N.V., Venkateswara Reddy K., Shankar M.N.S. Effect of post-process and in-process cooling on wide-area stir zone processed via friction stir processing with pin overlapping, Engineering Research Express, Vol. 5, https://doi.org/10.1088/2631-8695/acdb33, (2023).
12. Rao. A.G., Katkar. V.A., Gunasekaran. G., Deshmukh. V. P., Prabhu. N., Kashyap. B.P. Effect of multipass friction stir processing on corrosion resistance of hypereutectic Al-30Si alloy, Corrosion Science, Vol. 83, pp. 198-208, https://doi.org/10.1016/j.corsci.2014.02.013, (2014).
13. Kumar, A., Sharma, S.K., Pal, K., Mula S. Effect of Process Parameters on Microstructural Evolution, Mechanical Properties and Corrosion Behavior of Friction Stir Processed Al 7075 Alloy, Journal of Materials Engineering and Performance, Vol. 26, pp. 1122-1134, https://doi.org/10.1007/s11665-017-2572-3, (2017).
14. ISIM Timisoara - Research project PN 23 37 01 02/2023-2026 „ Research on the modification of metallic materials properties using the innovative and environmentally friendly method of friction stir processing in liquid environment” (financed by the Ministry of Research, Innovation and Digitization within the Nucleu Program of ISIM Timisoara, contract 16N/2023 - Nucleu Program PN ISIM 2023-2026).
15. Periasamy, S.R., Ramalingam V.V., Vijayakumar A., Senthilkumaran, H.H., Sajja, V.T., Ramasamy, P., Sureshkumar, S.R.K.K.P., Influence of Friction Stir Processing Parameters on the Mechanical and Corrosion Properties of Al-Cu-Li Alloy, Iranian Journal of Materials Science & Engineering, Vol 20, Issue 2, pp. 1, http://dx.doi.org/10.22068/ijmse.2670, (2023).
16. Vignesh, R.V., Padmanaban, R., Intergranular corrosion susceptibility of friction stir processed aluminium alloy 5083, Materials Today: Proceedings, Vol. 5, Issue 8, pp. 16443-16452, https://doi.org/10.1016/j.matpr.2018.05.143, (2018).
17. D’Urso, G., Giardini, C., Lorenzi, S., Cabrini, M., Pastore, T., The Effects of Process Parameters on Mechanical Properties and Corrosion Behavior in Friction Stir Welding of Aluminum Alloys. Procedia Engineering, Vol. 183, pp. 270-276, https://doi.org/10.1016/j.proeng.2017.04.038, (2017).
18. Esmaily, M., Mortazavi, N., Osikowicz, W., Hindsefelt, H., Svensson, J.E., Halvarsson, M., Thomson, G.E., Johansson, L.G., Influence of Multi-Pass Friction Stir Processing on the Corrosion Behavior of an Al-Mg-Si Alloy, Journal of The Electrochemical Society, Vol. 163, Issue 3, pp. C124-C130, https://doi.org/10.1149/2.1091603jes, (2016).
Copyright (c) 2024 Lavinia Ileana Sirbu, Lia Nicoleta Botila, Gabriela Victoria Mnerie

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.