CONSTRUCTIVE AND FUNCTIONAL CONSIDERATIONS CONSIDERING THE EVOLUTION OF TEMPERATURE IN THE DLP PRINTING PROCESS WITH ECOLOGICAL RESIN
Abstract
The purpose of this paper is to identify how the temperature of the print space changes in the DLP 3D printing process. To carry out the experimental program, a set of sensors was designed to be used. Them allow us to determine the temperature and humidity in several points considered in relation to the integrated 3D printing system. From the experimental tests performed at the level of the space in which the printing process is performed, the change in temperature and humidity is greater during the printing process than in the other two areas considered. It can also be seen that for better control of the temperature at the printing surface, it is recommended to carry out a process to improve the constructive solution of the printer with an additional ventilation system at the bottom of it.
References
2. Vasilescu, M.D. Influence of technological parameters on the emision on DLP 3D printing process. Rev.Chim., (Bucharest), 70, no. 12, 4387-4392, (2019).
3. Zguris, Z. FORMLABS WHITE PAPER How Mechanical Properties of Stereolithography 3D Prints are Affected by UV Curing. Available online: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwiIjbSs06vrAhXqlIsKHeysCyk4FBAWMAl6BAgEEAE&url=https%3A%2F%2Fwww.dynamismpro.com%2Fdownloadfile%2Fwhite-papers%2Fwhite-papers_22.shtml&usg=AOvVaw0OFQOowyf_q3EJQ1Q63Tju, (15 December 2021).
4. Vasilescu, M.D. Study the influence of colour resin on the emission for DLP 3D printing process. Revista de Tehnologii Neconventionale, Sibiu Vol. 24, Iss. 2, 60-63, (Jun 2020).
5. {Get 3 for the price of 2} Anycubic Plant-based UV Resin 0.5KG. Available online: https://www.anycubic.com/collections/uv-resin/products/anycubic-plant-based-uv-resin?variant=40701789307042, (15 December 2021).
6. ANYCUBIC 3D Printing Photon. Available online: https://www.anycubic.com/collections/anycubic-photon-3d-printers/products/anycubic-photon-3d-printer, (15 December 2021).
7. Photon File Validator 2.1. Available online: https://github.com/Photonsters/PhotonFileValidator/releases, (15 December 2021).
8. DHT11, DHT22 and AM2302 Sensors. Available online: https://learn.adafruit.com/dht, (15 December 2021).
9. Getting Started with Arduino MEGA2560. Available online: https://www.arduino.cc/en/Guide/ArduinoMega2560, (15 December 2021).
10. Getting Started with Arduino MEGA2560. Available online: https://www.arduino.cc/en/Guide/ArduinoMega2560, (15 December 2021).
11. MyLCD20x4 Clock with Value-Added Information - BME680. Available online: https://www.hackster.io/ingo-lohs/mylcd20x4-clock-with-value-added-information-bme680-cd4cea, (15 December 2021).
12. Interfacing SD Card with Arduino using SD Card Module. Available online: https://www.galaxysofts.com/new/interfacing-sd-card-with-arduino-using-sd-card-module/, (15 December 2021).
13. Case LCD2004. Available online: https://www.thingiverse.com/thing:5244695, (13 February 2021).
14. Case Arduino Mega 2560. Available online: https://www.thingiverse.com/thing:5245192, (13 February 2021).
15. TRONXY XY-2 Pro I3 Structure 3d printer 255mm*255mm*260mm. Available online: https://www.tronxy3d.com/products/tronxy-xy-2-pro-3-structure-3d-printer-255mm-255mm-260mm, (15 February 2021).
16. PLA filament for 3D printing. Available online: https://devildesign.com/download/PLA_-_product_card.pdf. (15 February 2021).
Copyright (c) 2022 Mircea Dorin Vasilescu
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
