CONSTRUCTIVE AND DIMENSIONAL CONSIDERATIONS ON THE REALIZATION OF A VERTICAL PISTON INJECTION STAND
Keywords:
injection molding stand, dimension consideration, deformation, injection, manufacturing
Abstract
The study undertaken addresses the possibility of making a device for analyzing the way in which the plasticization parameters of the materials in the injection process. The analysis is carried out both from a dimensional point of view, but also from the point of view of the deformations that may appear in the injection assembly during its production process. The geometrical change of the dimensions of the active elements in the analyzed process is also analyzed. It can be seen that the active elements undergo a slight ovalization process along the directions of the X-Y plane at the piston of the order of microns, and at the compression cylinder also of the order of microns.
References
1. Bryce, Douglas M. Plastic Injection Molding, Volume I Mold Design And Construction Fundamentals Society Of Manufacturing Engineers ( SME) pag 12-37 ( 1998)
2. R. Mihail, N. Goldenberg Plastic Material Processing, Second Edition, Technical Publishing House, București, pag 321-365 (1963)
3. *** - plunger-injection-molding-guide, from https://mold7.com/plunger-injection-molding-guide (2024, 01 02).
4. *** - Injection molding process | Types of injection molding processes from https://blogmech.com/injection-moulding-process-and-types/(2024, 01 02)
5. *** - Injection-mold-sprue from https://mold7.com/injection-mold-sprue-what, https://mold7.com/plunger-injection-molding-technique-producing-plastic-parts(2024-02), (2024, 01 10).
2. R. Mihail, N. Goldenberg Plastic Material Processing, Second Edition, Technical Publishing House, București, pag 321-365 (1963)
3. *** - plunger-injection-molding-guide, from https://mold7.com/plunger-injection-molding-guide (2024, 01 02).
4. *** - Injection molding process | Types of injection molding processes from https://blogmech.com/injection-moulding-process-and-types/(2024, 01 02)
5. *** - Injection-mold-sprue from https://mold7.com/injection-mold-sprue-what, https://mold7.com/plunger-injection-molding-technique-producing-plastic-parts(2024-02), (2024, 01 10).
Published
2024-03-29
How to Cite
Borleanu, M. (2024). CONSTRUCTIVE AND DIMENSIONAL CONSIDERATIONS ON THE REALIZATION OF A VERTICAL PISTON INJECTION STAND. Nonconventional Technologies Review, 28(1). Retrieved from https://www.revtn.ro/index.php/revtn/article/view/460
Section
Articles
